Turning On The Monitor - Zenith P60W26 Owner's Manual

Turning on the Monitor

- When using the remote control, aim it at its sensor on the Monitor.
Turning on the Monitor just after installation
Connect power cord correctly.
1
2
Press the main ON/OFF button on the Monitor. At this moment, the Monitor is
switched to standby mode. Press the
Monitor or press the power on or video/pc button on the remote control and
then the Monitor will be turned on.
Turning on the Monitor (power cord is still connected)
1
If the Monitor is turned off with the
Press the
or video/pc button on the remote control and then the Monitor will be turned
on.
2
If the Monitor is turned off with the ON/OFF button on the Monitor
• Press the main ON/OFF button on the Monitor to turn on the Monitor.
3
If the Monitor is turned off with the remote control and also the ON/OFF
button on the Monitor
• Press the main ON/OFF button on the Monitor and then press the
INPUT SELECT button on the Monitor or press the power on or video/pc
button on the remote control and then the Monitor will be turned on.
Tips
• Adjusting volume level
The volume(
the level of sound.
32
or INPUT SELECT button on the Monitor or press the power on
) button increases the sound and the volume(
G G
or INPUT SELECT button on the
button on the Monitor
) button reduces
F F
or