Cable Output - Saniflo SANIFOS 110 P Operating & Installation Manual

SANIFOS 610 and SANIFOS 1300 floats
® ®
• Gather together the float cables
• Fix them to the stainless steel bar using a tie-wrap

4.3.2 Cable output

Case where the station is floor-standing
SANIFOS 110 P, SANIFOS 280, SANIFOS 610 and SANIFOS 1300
® ® ® ®
Use of cable glands: side outlet of the cables on the tank.
Locate the "pre-holes" specially for the passage of the cable glands, present on the tank.
About SANIFOS 610 and SANIFOS 1300, 5 pre-holes:
® ®
Passage of float cables through cable glands PG 11:
• Make a hole ø 17 mm
• Insert the cable gland with a silicone thread
• Tighten the inside nut
Passage of motor cables through cable glands PG 13:
• Make a hole ø 19 mm
• Insert the cable gland with a silicone thread
• Tighten the inside nut
15