Labeling Channels - Zenith J3W41321A Operating Manual

Labeling channels

Channel labels appear over the
channel number display each time
you turn on the TV, select a
channel, or press -/DISPLAY.
You can choose any four charac-
ters to identify a channel.
-/
PICTURE
SIZE
NOTE:
To return from CH LABEL menu to
OPTION menu, select "OPTION
MENU", then press or
26
J3W41321A_En_P25-30
To create channel labels
1
Select a channel you want to label.
2
Press MENU, then press
to select
Press
LABEL", then press
CH LABEL menu will appear.
3
Press
CLEAR". Press
"SET".
4
ENTER
Press
Then press
character in the first space. Press
the button repeatedly until the
character you want appears on
the screen.
The characters rotation
as follows:
If the character which you desire appears, press ENTER.
Repeat this step to enter the rest of the characters.
If you would like a blank space in the label name, you must
choose the empty space from the list of characters; otherwise, a
dash will appear in that space.
When you finish inputting the label name, press ENTER.
5
Press EXIT to return to the normal screen.
6
Repeat steps 1-5 for other channels. You can assign a label to each
channel.
To erase channel labels
1
Select a channel with a label which you want to erase.
2
Press MENU, then press
Press
display the CH LABEL menu.
3
Press
"CLEAR", then press ENTER.
.
4
Press EXIT to return to the normal screen.
5
Repeat steps 1-4 to erase other channel labels.
26
or
(OPTION) menu.
or to select "CH
or . The
or to select "SET/
or to select
to select "LABEL".
or to enter a
or to select
or to select "CH LABEL", then press
or to select "SET/CLEAR". Press
24/03/2006, 2:24 PM
OPTION
ON / OFF TIMER OFF
CH LABEL
:SELECT :ADJUST
CH LABEL : CH 23
SET / CLEAR
LABEL ––––
OPTION MENU
:SELECT :ADJUST
ENTER : SET EXIT : END
CH LABEL : CH 23
SET
LABEL A –––
OPTION MENU
:ADJUST ENTER : SET
EXIT : END
(OPTION) menu.
or to
or to select