Tv Operation - Zenith J3W41321A Operating Manual

TV operation

- /
PICTURE
SIZE
NOTES:
•
If a channel with no broadcast is
selected, the sound will automati-
cally be muted.
•
If a station being viewed stops
broadcasting, the TV will automati-
cally shut itself off after 15 minutes.
18
J3W41321A_En_P18-24
1
To turn on the TV, press POWER.
2
Adjust the volume level by pressing
VOL + or – . The volume level will be
indicated on the screen by green
bars. As the volume level increases,
so do the number of bars. If the
volume decreases, the number of
green bars also decreases.
3
Set the TV/CABLE menu
option to the appropriate
position (see page 16).
4
Press the Direct Channel Selection
buttons to select the channel.
TO SELECT ANALOG CHANNELS
1-9:
10-99:
100-125: Press the 3 digits in order. Example, to select channel 120,
TO SELECT DIGITAL CHANNELS
Press the first 3 digits, then press the "–/DISPLAY" button, followed by
the remaining 3 digits.
Example, to select channel 015-001, press 0 1 5 – 0 0 1.
•
If a channel is selected with only audio content, "AUDIO ONLY"
will be displayed on the screen.
•
If a channel is selected with a weak digital signal, "DIGITAL
CHANNEL SIGNAL STRENGTH IS LOW" will be displayed on the
screen.
•
If a channel is selected to which you have not subscribed,
"DIGITAL CHANNEL IS SCRAMBLED" will be displayed on
the screen.
VHF/UHF/CABLE CHANNELS
TV
VHF
2-13
UHF
14-69
18
TV
CABLE - CABLE TV channels
Press 0 twice, then 1-9 as
needed. Example, to select
channel 2, press 0 0 2.
Press 0, then the remaining 2 digits. Example, to select
channel 12, press 0 1 2.
press 1 2 0.
CABLE
VHF
2-13
STD/HRC/IRC
14-36
37-59
60-85
86-94
95-99
100-125 (100) (125)
01
24/03/2006, 2:23 PM
VOLUME 32
- VHF/UHF channels
A B C D
(A) (W)
(AA) (WW)
(AAA) (ZZZ)
(86) (94)
(A-5) (A-1)
(5A)
A N T
1 2