Starting Setup - Zenith J3W41321A Operating Manual

Starting setup

The STARTING SETUP menu appears
the first time you turn on the TV, and
assists you to select the menu
language, specify the TV/CABLE
setting, and program your channels
automatically.
-/
PICTURE
SIZE
14
J3W41321A_En_P14-17
IMPORTANT: Make sure that the antenna or cable TV system
connection is made!
1
Press POWER. The starting
setup function begins and
the Language setup menu
appears on the screen.
Press
your desired language, then
press ENTER.
2
Press
or "CABLE", then press
ENTER.
3
Press
"START", then press ENTER.
If you select "CANCEL" and
press ENTER, the STARTING
SETUP stops and changes to
the TV screen.
4
Now the "AUTO SETUP" starts. After the starting setup is com-
pleted, the TV channel appears on the screen.
• Depending on the reception condition, it may take approximately
10 minutes to complete memorizing digital cable channels.
Please be patient.
NOTE:
If you press EXIT in the process of "AUTO SETUP", the STARTING
SETUP stops and changes to the normal screen.
• When you make a menu selection, your changes occur immediately.
You do not have to press EXIT to see your changes.
• When you are finished programming the menus, press EXIT.
14
or to select
or to select "TV"
or to select
24/03/2006, 2:22 PM
L A N G U A G E / L A N G U E / I D I O M A
E N G L I S H
F R A N Ç A I S
E S PA Ñ O L
: S E L E C T E N T E R : S E T
C H A N N E L P L A N
T V
C A B L E
: S E L E C T E N T E R : S E T
A U T O S E T U P
S TA R T
C A N C E L
: S E L E C T E N T E R : S E T