Operating Sequence - Zanussi ZWF 14791 W User Manual

Operating sequence

as much as possible. Close the door.
2. Measure out the detergent and the fabric
softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required,
pour it into the main wash compartment
and, if you wish to carry out a programme with
the prewash phase, pour it into the
compartment marked
If required, pour fabric softener into the
compartment marked
must not exceed the «MAX» mark in the
drawer). Close the drawer gently.
3. Select the required programme
The selector dial is divided into following the
sections:
Proportional programmes
●
1. Load the laundry
Open the door by
carefully pulling the
door handle outwards.
Place the laundry in the
drum, one item at a
time, shaking them out
.
(the amount used
Cottons,
●
Synthetics,
●
Special
●
Turn the programme selector dial to the
required programme. The washing machine will
propose a temperature and automatically
select the maximum spin value provided for the
programme you have chosen.
You can change these values by operating the
corresponding buttons. The Display shows the
following information about the selected
programme proposed:
1 temperature
2
spin speed
3
soil degree
4
delay start icon
5
phase icons making up the programme
duration
6
door locked icon
7
options icons
8 duration of the programme and delay
start
9
child safety lock icon
The green Start/Pause light starts to flash.
The selector dial can be turned either
clockwise or anticlockwise. Position «O» to
Reset programme/ Switching off of the
machine.
At the end of the programme the selector
dial must be turned to position «O», to
switch the machine off.
15