Operating Sequence - Zanussi ZWF 14581 W User Manual

Operating sequence

as much as possible. Close the door.
2. Measure out the detergent and the fabric
softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required,
pour it into the main wash compartment
and, if you wish to carry out a programme with
the prewash phase, pour it into the
compartment marked
If required, pour fabric softener into the
compartment marked
must not exceed the «MAX» mark in the
drawer). Close the drawer gently.
3. Select the required programme
Turn the programme selector dial to the
required programme.
1. Load the laundry
Open the door by
carefully pulling the
door handle outwards.
Place the laundry in the
drum, one item at a
time, shaking them out
.
(the amount used
The selector dial is
divided into following
the sections:
Cottons,
●
Synthetics,
●
Special
●
The Start/Pause light starts to flash, the display
shows the duration of the selected programme.
At the end of the programme the selector
dial must be turned to position «Off», to
switch the machine off.
IMPORTANT!
If you turn the programme selector dial to
another programme when the machine is
working, the red Start/Pause pilot light will
flash 3 times and the message Err is displayed
on the display to indicate a wrong selection.
The machine will not perform the new selected
programme.
4. Select the temperature
Press this button repeatedly to increase or
decrease the temperature, if you want your
laundry to be washed at a temperature
different from the one proposed by the washing
machine.Maximum temperatures are 95°C for
Cottons, 60°C for Synthetics, 40°C for
Delicate, Wool, Handwash, Sport Shoes 40°
and Sport 40°, 30°C for Silk, Duvet and Mini
30', while corresponds to cold wash.
15