Zanussi ZWF 14581 W User Manual page 18

Operating sequence
Washing programme phase icons
By selecting the wash programme, the washing
programme phase icons corresponding to the
various phases making up the programme are
shown in the bottom of the display.
After the machine has started, only the running
icon stays on. When the programme has
finished, a flashing zero «
Delayed start
The selected delay (20 hours max) set by
means of the relevant button appears on the
display for about 3 seconds, then the duration
of the previously selected programme is
displayed.
minute.
Incorrect option selection
Err is displayed for about 2 seconds and the
integrated red Start/Pause light start flashing.
18
» is displayed.
0.00
The delay time value
decreases by one unit
every hour and then,
when 1 hours remain,
the time decreases every
If an option which is not
compatible with the set
wash programme is
selected, the message
Alarm codes
paragraph "Something not working").
Heating phase
started the heating phase of the water in the tub.
Child safety lock enabled
This device permits you to leave the appliance
unsupervised without having the worry that
children might be injured by or cause damage
to the appliance.
This function remains activated also when the
washing machine is not working.
There are two different ways to set this option:
before pressing the Start/Pause: it will be
●
impossible to start the machine.
after pressing the Start/Pause: it will be
●
impossible to change any other programme
or option.
To enable or disable this option press
simultaneously for about 6 seconds "Easy Iron"
and "Extra Rinse" buttons until the icon
appears or disappears from the display.
In the event of
operating problems,
some alarm codes can
be displayed, for
example E20 (see
During the washing
cycle the display shows
a temperature icon
illuminated to indicate
that the appliance has