Name And Funtion - 2in1 BASIC PG-300 User Manual

NAMES AND FUNCTIONS
Display Screen
Display test result and other
information.
Buttons
Review stored results and adjust
parameters in setup mode. You can
turn the meter off by pressing '<'
button and '>' button at same time.
Eject Wheel
Remove the tested strips by rolling.
Front View
Test Strip Port
Insert the 2in1.® Test Strip. The meter
will turn on automatically when
2in1.® Test Strip
inserting the test strip.
Electrodes
Insert into test strip slot while facing up.
Sample Tip
The fresh blood sample is drawn into.
8