Wireless Charging; Setting The Time & Alarm - Bigben RR140I Operating Instructions Manual

Wireless charging

Compatible with wireless charging enabled smartphones. Other smart phones need to use wireless
charging adapters to work.
Put mobile phone on the top panel.
*Note: When the phone is being charged your phone's charging indicator will show as normal.
*Note: For maximum charging efficiency, the phone must be aligned with the center of the charging
area.
*Note: Phones that are capable of wireless charging may need to be placed slightly off center. The
built-in wireless receiver may not be centered inside the phone. This varies by brand/model.
Note: Wireless Charging and Radio / Aux in can be used at the same time.
Setting the time
• Press Power to enter standby mode.
• Press & hold Time Set (7) for 2 seconds. The display will flash.
• Press HR (Hour) Set / Min (Minute) Set (8, 9) to set the hour and minute.
• The Clock will show 24H mode.
Setting the alarm
• Press Power to enter standby mode.
• In standby mode, press & Alarm 1 (3) for 2 seconds and, the main digit will show 0:00.
• Press Hour (8) & Min (9) to set the alarm hour & minute.
• Press Alarm 1 (3) again to confirm alarm 1.
• Press Skip - / + to switch between the alarm outputs:
"Buzzer" and "FM" radio
• Press Alarm 1 to confirm the alarm output.
• There is dual alarm. Repeat the above steps to set Alarm 2 (4) & select the alarm output. Once the
alarm is set, the alarm display light will be ON.
- EN 5 -
Correct
Incorrect