Specifications - Wahl ST2200 User Manual

ST2200 Soldering Iron Tester User Manual
The following Kits include 2 WST-02B sensors, TC800K type K Wire Probe, TC801P
solder pot probe, sensor cleaning brush, 12423-01 soft carrying case and
operation/calibration manual. NIST Traceable Certificate of Conformance is optional.
KST2200C-110
KST2200F-110
KST2200C-220
KST2200F-220
The following Kits include 1 WST-03 sensor, 1 WST-02B sensor, TC800K type K Wire
Probe, TC801P solder pot probe, sensor cleaning brush, 12423-01 soft carrying case and
operation/calibration manual. NIST Traceable Certificate of Conformance is optional.
KST2203C-110
KST2203F-110
KST2203C-220
KST2203F-220
2.0

SPECIFICATIONS

Input Power:
Temperature Specifications:
Temperature Range:
Resolution:
Meter Accuracy:
Sensor:
Optional Sensors:
Resistance Specifications:
Resistance Range:
Resolution:
Accuracy:
°C display, 110 volt input voltage
°F display, 110 volt input voltage
°C display, 220 volt input voltage
°F display, 220 volt input voltage
°C display, 110volt input voltage
°F display, 110volt input voltage
°C display, 220volt input voltage
°F display, 220volt input voltage
-110 Models, 110VAC 50/60 Hz., 2 Watts.
-220 Models, 220VAC 50/60 Hz., 2 Watts.
50°F to 1300°F (10°C to 700°C)
Factory set at 0.1°F/C, switchable to 1.0°F/C via
internal jumper (see section 6.1 for details).
Greater of ±1.0°F/C or ±0.1% of reading.
WST-02B, 0.2 gram thermal mass sensor with
bonnet.
WST-02, 0.2 gram thermal mass sensor without
bonnet.
WST-03, elevated wire sensor.
0.00 to 100.00 Ohms
Factory set at 0.01 Ohms. Switchable to 0.1 Ohm
via internal jumper (see section 6.1 for details).
0-20 Ohms: ±0.15 ohm, ± 1 digit
20 - 100 Ohms: ±0.5% ± 0.1 ohm
Page 4 of 34