Introduction; Models And Contents - Wahl ST2200 User Manual

ST2200 Soldering Iron Tester User Manual
1.0

INTRODUCTION

The Wahl Instruments Model ST2200 Soldering Iron Tester (see Fig. 1) is designed for
the testing of hand-held soldering irons used in the assembly of electronic circuits and
components. It is intended to be used as a quality tool to assist manufacturers in
complying with Soldering Standard IPC/EIA J-STD-001C or other applicable standards.
It provides testing of Temperature, AC voltage, AC + DC voltage and Resistance to
Ground. It also has a feature for testing Anti-static Wrist Straps and for detecting voltage
spikes which might appear on the soldering iron tip.
1.1

MODELS and CONTENTS

Following is a list of the different models available along with a list of contents.
The following models include a WST-02B sensor, TC800K -3ft. Type K wire bead
probe, sensor cleaning brush (p/n 12408) and operation/calibration manual. NIST
Traceable Certificate of Conformance is optional.
ST2200C-110
ST2200F-110
ST2200C-220
ST2200F-220
ST220C-220B
ST220C-220E
WARRANTY & CALIBRATION
REGISTRATION at
www.palmerwahl.com/register
Registration is fast and easy. In about a minute you
can have your product automatically registered for
Warranty Protection and our Calibration Reminder
service. Let Palmer Wahl help you protect your
investment, and maintain product accuracy and
compliance with ISO and other quality standards.
Questions? Call Customer Service
at 1-800-421-2853 or 828-658-3131
Or email: register@palmerwahl.com
°C display, 110 volt input voltage
°F display, 110 volt input voltage
°C display, 220 volt input voltage
°F display, 220 volt input voltage
°C display, 220 volt input voltage
with British Plug and European Receptacle
°C display, 220 volt input voltage
with European Plug and Receptacle
Page 3 of 34