Safety Notes CAUTION: Read these instructions carefully before assembly and use and keep for future reference. The child may be hurt if you do not follow these instructions. WARNING: The walker is not intended for babies that can already walk unassisted. WARNING: Do not use the walker if it is damaged or broken.
Page 4
Safety Notes IMPORTANT - Adult assembly required. - Read all instructions before assembly and use of the product. - This baby walking frame is intended to be used by children who can sit unaided, approximately from 6 months. It is not intended for children weighing more than 12kg and/or more than 78cm in height.
Parts List 2 x AA batteries required (not included) A x 1 B x 1 C x 1 walker toy tray seat unit D x 6 E x 2 F x 2 anti-slip pad directional wheel universal wheel G x 6 H x 1 screw driver screw...
Page 6
Assembly 1. Unpack all contents and check that all parts are present before starting assembly. Please refer to parts list. Place walker (A) on a solid at surface with bottom of base facing upwards. Insert the pins of the universal wheels (F) into their housing located at the front of the walker.
Page 7
Assembly 3. Push the crotch portion of the seat unit (C) inside out to form the seat. IMPORTANT. The pattern fabric should be on the inside of the seat unit. Insert the 8 tabs located on the seat unit into the slots dotted around the seat ring.
Page 8
Assembly 4. Raise the baby walker top tray as shown until it clicks into place. Note. the baby walker has 3 height positions. 5. The toy tray (B) requires 2 x “AA” batteries (not included). Use a screw driver to unfasten battery cover. Insert batteries. Secure battery cover back into position.
Page 9
Assembly 6. Once batteries are installed, attach the ower (H) to toy tray (B). Press rmly until ower is secure. Attach the toy tray to the walker. Turn the clips located on the underside of the walker lengthwise to lock toy tray. To release, turn the clips 90°. locking clips Toy Tray Press the various buttons for sounds and melodies.
Height Adjustment The baby walker has 3 height positions. To adjust height, remove baby from walker. Turn the safety button lengthwise and press the safety button up until the mechanism is released. Adjust to desired height. WARNING! When the position has been selected, check the safety button is turned 90°...
Maintenance This product requires regular maintenance to keep it in good working order. Regularly check all parts of the product to ensure that they are operating correctly and for signs of wear or damage. Do not use this product if any part is broken, torn or missing and use only spares provided by the manufacturer.
Page 12
IMPORTED BY TARGET AUSTRALIA PTY LTD. 12 THOMPSON ROAD, NORTH GEELONG, VIC 3215 AUSTRALIA.