Hdmi Rec Output / Down Convert - Panasonic Lumix S1H Handbook

HDMI Rec Output / Down Convert

Output is according to the [ Rec Quality ].
YUV and bitrate are as follows.
Recording to Card
4:2:2 10-bit
4:2:0 10-bit
4:2:0 8-bit
Down-converting is also possible.
[ ] > [
AUTO
4K/30p (4K/25p)
1080p
1080i
OFF
Note
• 6K / 5.9K / 5.4K video is output with 4K or FHD.
To output during internal recording, firmware must be updated to version 2.0 or later.
• Anamorphic video is output with 4K or FHD.
• When set to High Frame Rate, the frame rate is down-converted for output.
• When set to a 4:3 or 3:2, black area is added to the images and they are output with a 16:9 aspect ratio.
• Output may be in 8-bit if you output to devices that do not support 10-bit.
HDMI Output
4:2:2 10-bit
4:2:2 10-bit
4:2:2 8-bit
► PAGE 102-103 : HDMI Output Image Quality
] > [ HDMI Rec Output ]
Outputs by down-converting to match the connected device.
Down-converts resolution to 4K and frame rate to 29.97p or 25p.
Down-converts resolution to FHD, and outputs as progressive.
Down-converts resolution to FHD, and outputs as interlaced.
Outputs at the resolution and recording frame rate of the [ Rec Quality ].
3. HDMI Output and TC IN/OUT
[ Down Convert ]
35