The Control Panel - Zanussi ZWF 1240 W Instruction Booklet

The Control Panel

1 Programme selelector dial
The selector dial is divided into following sections:
• Cotton, linen
• Synthetics
• Delicates, handwash, wool, silk and mini-
programme, rinses, drain, spin and delicate spin
The selector dial can be turned either clockwise or
anticlockwise.
Position E-Cottons corresponds to the ENERGY
SAVING programme for cotton and position O to Reset
programme/Switching OFF of the machine.
At the end of the programme the selector dial must be
turned to position O, to switch the machine OFF.
2 TEMPERATURE button
"Temp."
Press this button repeatedly to increase or decrease the
temperature, if you want your laundry to be washed at a
temperature different from the one proposed by the
washing machine.
Maximum temperatures are 90°C for white cotton,
60°C for coloured cotton and synthetic fabrics, 40°C for
delicate fabrics, wool and fabrics to be hand-washed,
30°C for silk and «Miniprogramme».
3 Spin speed button "Spin"
Press this button repeatedly to change the spin speed, if
you want your laundry to be spun at a speed different
from the one proposed by the washing machine. The
relevant light will light up. Maximum speeds are:
• for cotton: 1200 rpm for model ZWF 1240 W;
1400 rpm for model ZWF 1440 W;
1600 rpm for models ZWF 1640 W
and ZWF 1640 S;
• for synthetic, wool, and fabrics to be handwashed:
900 rpm
• for delicate, silk fabrics, miniprogramme:
700 rpm
Rinse hold position
machine will not drain the water of the last rinse, so as
not to crease the laundry.
At the end of the cycle, the light of the START/PAUSE
button goes off, the light
remain lit, a flashing zero appears on the display, to
indicate that the water must be drained.
There are 2 possibilities to empty out water:
• Select programme "Drain":
The water is emptied out without spinning.
• Select programme "Spin" or "Delicate Spin". Select
the spin speed by means of the relevant button and
then depress the START/PAUSE button. The water is
emptied out and the laundry is spun at the selected
spin speed.
Attention! Before selecting "Drain", the "Spin" or the
"Delicate Spin" programme the selector dial has to be
positioned on O (cancelling).
6
: when you choose this option, the
and the "End" pilot light