Zanussi ZWF 1240 W Instruction Booklet page 8

Delayed start
The selected delay (23 hours max) set by means of the
relevant button appears on the display for 3 seconds,
then the duration of the previously selected programme
is displayed.
The countdown is updated every hour and when remain
the last 2 hours each 30 min.
Incorrect option selection
f an option which is not compatible with the set wash
I
programme is selected, the message Err is displayed for
2 seconds.
Alarm codes
In the event of operating problems, some alarm codes
can be displayed, for example E20 (see paragraph
"Something not working").
End of programme
When the programme has finished a flashing zero is
displayed.
7 START/PAUSE button
This button has two functions: Start - Pause.
• Start:
After having selected the required programme, press this
button to start the machine; the corresponding pilot light
stops flashing.
If you have selected the delayed start, the machine
begins its countdown. The duration of the programme or
the delay appears on the display.
• Pause
To interrupt a programme which is running, depress the
Start/Pause button: the corresponding pilot light starts
start to flash.
To restart the programme from the point at which it was
interrupted, press the START/PAUSE button again.
8