Zanussi ZWF 1022 User Manual page 13

1
Programme selector dial
1
Temperature button
90°
60°
40°
30°
2
+
Turn the programme selector dial to the required programme. The selector
dial can be turned either clockwise or counter-clockwise. The green pilot
light of the button 6 starts flashing: the appliance is now switched on.
If you turn the programme selector dial to another programme when
the appliance is working, the red pilot light of the button 6 will flash
3 times to indicate a wrong selection. The appliance will not perform the
new selected programme.
• To switch the appliance off , turn the programme selector dial to the
position
• To cancel or change a running programme, switch the appliance off by
turning the programme selector dial to the position
programme by turning the selector to the desired programme. Start the
new programme by pressing the button 6 again. The water in the tub
will be not emptied out.
Push the temperature button to select the most suitable temperature for
washing your laundry .
90°
60°
40°
AUTO
30°
2 3 4
.
5 6
. Select the new
7.1
7.2
7.3
13