Select The Required Programme; Start The Machine; At The End Of The Programme - Zanussi ZT 1012 Instruction Booklet

6. Select the required programme

Turn the dial clockwise to the programme B or A (if
you wish to perform a prewash).

7. Start the machine

Before starting up the machine check that:
the appliance is plugged in
the water supply tap is turned on
the drain hose is correctly and securely positioned
the door and the detergent dispenser drawer are
closed.
Depress the ON/OFF button
illuminate and the machine starts operating.
: the mains-on light will

8. At the end of the programme

The machine stops automatically.
The door is controlled by a safety device which releases
2 minutes after the end of the programme.
Switch the machine off by depressing the ON/OFF
button again. The mains-on light goes out.
Remove the laundry from the drum and carefully check
that the drum is empty so as to avoid any forgotten
items being damaged in a subsequent wash (e.g.
shrinking) or their colour running into a load of whites.
If you do not intend to carry out another wash, close the
water tap.
Leave the door open to prevent the formation of mildew
and unpleasant smells.
8