Select The Required Options; Start The Programme; At The End Of The Programme - Zanussi ZJ 1217 Instruction Booklet

7. Select the required options

The light corresponding to the depressed button
illuminates.

8. Start the programme

To start the selected programme, press the
START/PAUSE button; the corresponding light stops
flashing .
The pilot light corresponding to the wash phase which is
running is on.
The machine starts operating.

9. At the end of the programme

The machine stops automatically.
If the RINSE HOLD option has been selected, the light
of the START/PAUSE button flashes to indicate that the
water must be emptied out before opening the door.
Release of the lock is indicated by the coming on of the
END light and by the going out of the DOOR light.
Turn the programme selector dial to Reset O.
Switch the machine off by pressing the ON/OFF button.
Remove the laundry from the drum and carefully check
that the drum is empty so as to avoid any forgotten
items being damaged in a subsequent wash (e.g.
shrinking) or their colour running into a load of whites.
If you do not intend to carry out another wash, close the
water tap.
Leave the door open to prevent the formation of mildew
and unpleasant smells.
11