ECTIVE MI Series Installation And Operating Instructions Manual page 31

[
ECTIVE
® POWER INVERTER – MI-/TMI-SERIES
Accessory
Number
1 unit Remote K01***
1 unit Remote KS02****
1 unit 3m RJ12 remote cable
*** suitable for model from MI150-series
**** suitable for model from TMI150-series
Intended use
ѥ
Warning!
Fire hazard!
The ECTIVE inverter of the MI/TMI-series are generally build for so called "Off-Grid"-
®
Systems and should only be used autonomously . Do not connect the inverter output
(socket) with an other voltage source . All models with a mains priority circuit should be
connected with a power supply only through the provided AC-input . Disregarding this
advice is life threatening and will destroy the inverter immediately .
⚠
Caution!
The inverter should not be used in vehicles, in which the +pole is connected to the
chassis .
⚠
Caution!
Please mind the input voltage!
The inverter should only be connected to voltage sources which correspond to follow-
ing provisions . 12 V=12 V, 24 V= 24 V
If connected to a higher voltage source the fuse can immediately blow and destroy the
inverter .
Designation
]
29