pro user PSI600 Operating Manual page 10

LC-Display of the main unit and wired remote control
Item Description
A
LCD-Display: shows all the relevant information such as voltage, current, wattage, etc.
Displays the unit of the currently measured value. Press the button to toggle the
B
displayed measured values
Only at models PSI1000TX & PSI1500TX: If a PV solar panel and a battery is
C
connected, an arrow under the sun symbol will flash that indicates the battery charging
process.
Over temperature protection: When this icon appears and flashes, the inverter
D
automatically enabled over temperature protection.
Protection-alert: When this icon appears, the inverter automatically activated a
E
protection feature.
Battery error: When this icon appears, the battery voltage is outside the inverter´s
F
permissible range.
Sleep mode: Press and hold the BACKLIGHT-button for 3 seconds to activate or
G
deactivate sleep-mode. Note: If AC output power is lower than 25W, the inverter will
activate for 10 seconds and then turn off again for one minute, and so on.
Remote connection (only if main switch is in position II ): if the remote unit is connected
H
this icon will appear. It will flash if the remote unit is not connected.
Battery-indicator: The displayed bars provide a indication of the charging status of the
I
connected battery. The battery indicator flashes when the battery is being charged.
10