Installation Instructions; Technical Specifications - Zanussi FLE 1016 W Instruction Booklet

Installation Instructions

It is dangerous to alter the specifications or
attempt to modify this product in any way.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.
Should the appliance power supply cable need to
be replaced, this should be carried out by our
Service Force Centre.

Technical Specifications

DIMENSIONS
POWER SUPPLY VOLTAGE
TOTAL POWER ABSORBED
WATER PRESSURE
SPIN SPEED
LOAD CAPACITY
CONSUMPTION DATA CALCULATED
ON 5 KG NORMALLY SOILED COTTON
ITEMS AT 60°C
This appliance complies with the following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
Height
Width
Depth
Minimum
Maximum
Maximum
Cotton, linen
Synthetics
Delicate fabrics
Wool
Energy
Water
23
85 cm
60 cm
60 cm
230-240 V/50 Hz
2050 W (10A)
50 kPa (0.5 bar)
800 kPa (8 bar)
1000 rpm (FLE 1016 W)
1100 rpm (FLE 1116 W)
1200 rpm (FLE 1216 W)
1400 rpm (FLE 1416 W)
5 kg (max. 6 kg)
2.5 kg
2.5 kg
2 kg
0.95 kWh
55 litres