Download Print this page

Advertisement

Quick Links

GB
AN_W9Z(E)#p02-05.pm6
Downloaded from:
Mounting the Lens
1
Remove the wide conversion lens
from its original box. Put the screw
thread of the wide conversion lens
and the projector lens together.
2
Fix the focus ring of the projector
manually. Then turn the wide
conversion lens clockwise slowly.
(NOTE: Mounting the lens when
the screw thread of both lenses
is incorrectly set may cause
damage. Make sure that the
screw thread of both lenses is set
correctly and then turn the wide
conversion lens slowly.)
3
When the wide conversion lens has been mounted, set
the part for preventing the lens from falling. (See the
"Mounting the part for preventing the lens from falling"
section in this manual.)
Mounting the part for preventing the
lens from falling
1
Set the part for preventing the
lens from falling as shown on the
illustration. (Make sure that the
part is attached to the outer ditch
of the focus ring on the projector.)
2
Attach the two screws (included)
using the included screwdriver.
2
http://www.usersmanualguide.com/
2
Projector lens
Wide conversion lens
The part for preventing
the lens from falling
(included)
01.12.27, 1:12 PM

Advertisement

loading

Summary of Contents for Sharp AN-W9Z

  • Page 1 Mounting the Lens Projector lens Remove the wide conversion lens from its original box. Put the screw thread of the wide conversion lens and the projector lens together. Wide conversion lens Fix the focus ring of the projector manually. Then turn the wide conversion lens clockwise slowly.
  • Page 2: Before Calling For Service

    Adjust the picture size and focus Refer to the “Zooming and Focusing” section in the Projector Operation Manual for details about adjusting the picture size and focus. Before Calling for Service 1) Is the lens in focus? (See the “Zooming and Focusing” section in the Projector Operation Manual.) 2) Is the projection distance within the range of focus? (Check the projection distance charts).
  • Page 3: Specifications

    Specifications Product type Wide Conversion Lens for Projector Model AN-W9Z Type of lens Wide conversion lens Picture size (diagonal) 50" to 150" Focal length 26.1 ~ 35.3mm F no. Screen width to throw 1.45 ~ 1.96:1 distance ratio Dimensions Ø 91.5 × 56.0 Weight Approx.
  • Page 4 Wide mode Screen size (16:9) Projection Distance (y) When using a Diag. Width Height Maximum (y1) Minimum (y2) wide screen (16:9) 150" 131" 74" 21'6" (6.6 m) 15'1" (4.8 m) In case of displaying 133" 116" 65" 19'1" (5.8 m) 14'1"...
  • Page 5 This file has been downloaded from: www.UsersManualGuide.com User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes.. Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide, manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product, documentation manual, user maintenance, brochure, user reference, pdf manual Downloaded from:...