Accessory - Westfalia M1R-KZ2-12ST Instruction Manual

PART A: Template Follower
1. The template follower enables template and pattern routing on workpieces.
2. Remove the four countersunk screws from the base plate.
3. Lay the template follower into the channels. Ensure the template follower
faces downwards before refitting the base plate. Lay the router with the
template follower against the template.
4. Switch on the router. Loosen retaining lever (4) and slowly lower the router
to the workpiece. Until the adjusted depth-of-cut is reached. Re-tighten the
retaining lever (4).
5. Lead the router with projecting template follower along the template by
applying light sideward pressure.

Accessory

20