Table of Contents
Advertisement
3
Installation
This chapter describes the installation procedures for the switch.
Switch installation involves the steps that are described in the following sections:
• Step 1: Prepare the site
• Step 2: Protect against electrostatic discharge
• Step 3: Unpack the switch
• Step 4: Mount or place the switch
• Optional Step 5: Install SFP or SFP+ transceiver modules
• Step 6: Connect devices to the switch
• Step 7: Check the installation
• Step 8: Apply AC power and check the LEDs
• Optional Step 9: Connect a console to the switch
31
Advertisement
Table of Contents
Troubleshooting
