Table of Contents
Advertisement
ONLINE ELECTRONICS LTD
7. CERTIFICATION APPENDIX
EQUIPMENT:
MANUFACTURER:
NOTIFIED BODY NUMBER: 0891
ATEX CERTIFICATE:
IECEx CERTIFICATE:
MARKINGS:
APPLICABLE STANDARDS: EN 60079-0:2012/A11:2013
POLLUTION DEGREE:
OVERVOLTAGE CATEGORY: I/II (IEC 60664-1)
SPECIAL CONDITIONS FOR SAFE USE:
1.
WARNING: Do not open when energized.
2.
WARNING: Must be installed in accordance with user manual.
3.
All intrinsically safe installations must be in accordance with the assembly and installation
regulations described in IEC 60079-14.
4.
Refer to the provided parameter tables for external connection parameters.
5.
Cable glands used with this equipment must be IECEx/ATEX approved with IP66 rating or
greater and be selected with consideration of the expected environmental conditions at the
point of installation.
6.
This equipment contains an internal SD card that must not be accessed or removed or
replaced in a hazardous area.
7.
This equipment contains a USB port that must only be used by the manufacturer during
production, test, repair and overhaul of the equipment in a safe area. It is not intended to
be used by the end-user in a hazardous or non-hazardous area at any time.
8.
Aluminium versions may present a spark hazard and must only be installed in hazardous
areas such that the ignition sources due to impact and friction are excluded.
9.
Painted or powder coated versions may present an electrostatic charging hazard and
should not be mounted in areas where they could be subjected to highly efficient charging
mechanisms, such as fast moving dust or particle filled air, and shall only be cleaned with
an anti-static or damp cloth.
ID5002P MANUAL RevA01
ID5002P Pig Signaller
Online Electronics Ltd
Online House
266 Auchmill Road
Aberdeen
AB21 9NB
Tel:
+44 (0) 1224 714 714
Web:
www.online-electronics.com
EMT16ATEX0007X
IECEx EMT 16.0006X
II 1 G
Ex ia IIB T4 Ga
EN 60079-11:2012
IEC 60079-0:2011
IEC 60079-11:2011
2 (IEC 60664-1)
-40°C ≤ Ta ≤ +85°C
Page 20 of 21
Advertisement
Table of Contents
