Download Print this page

Tech Logic VoiceLink II User Manual page 19

Infrared sound field system

Advertisement

TROUBLE SHOOTING GUIDE ____________________________________
Note: Most problems are directly related to low battery power. So please
verify that the batteries are fully charged and less than two years old.
No Sound
(Nothing works)
Body-Pack or Handheld
Transmitter does not work
Static, Noisy, or fuzzy Sound Check charge on batteries.
Dropouts
Check for power. Red LED next to power switch.
Verify that AC outlet has power.
Verify that the sound system works
Verify dome sensor is receiving power, Green
LED in center of sensor
Check batteries, Green LED when turned "on"
Check microphone cable, wiggle back & forth at
microphone and at connector end.
Verify signal reception from transmitter to
receiver, LED (green) adjacent to volume
control.
Check Hi / Lo switch inside battery compartment
(Place in "Hi" position)
Along side of battery barrel on handheld
Verify that no other transmitter is turned "on" on
the same channel.
Bright sunlight, high intense fluorescent or
halogen lights near sensor.
Verify that the infrared beam transmitted from
the transmitter (dark red window) is not being
obstructed by clothing or other solid objects.
Dark colored walls have a tendency to absorb
infrared and do not reflect efficiently.
Glass windows and doors allow competing
infrared light which weakens IR transmission.
Persistent dropouts may require installation of an
additional sensor.

Advertisement

loading
Need help?

Need help?

Do you have a question about the VoiceLink II and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Irv-268n