Setting The Tile Mode - LG 55WV70MS Easy Setup Manual

20
Installation
Installation Menu (V 2.21)
LG Digital Signage Setup
White Balance Adjust
Password Change
Confi guration Cloning
MCU Version V1.02.08
• R-Gain
• G-Gain
• B-Gain
• Backlight
• Reset
Close
R-Gain Adjusts the level of red. The higher the
number, the redder the set. Decrease the
number if the screen looks too red.
G-Gain Adjusts the level of green. The higher the
number, the greener the set. Decrease
the number if the screen looks too green.
B-Gain Adjusts the level of blue. The higher the
number, the bluer the set. Decrease the
number if the screen looks too blue.
Backlight Adjusts the brightness. The higher the
number, the brighter the set. This works in
the same way as the backlight of the user
menu.
Reset Resets the white balance value to the fac-
tory settings.

Setting the Tile Mode

In Tile Mode you can view an image in a larger
scale by connecting multiple monitors.
OK
◄ 187 ►
184
184
80
To Set
• 3X3:
When using nine monitors
ID 1 ID 1
ID 4 ID 4
ID 7 ID 7
Tile Mode Off: An input image is not
enlarged, and the same image is shown on
all connected monitors.
Tile Mode On: An input image is enlarged
according to the value in the H. Set Count
and V. Set Count fields.
OPTION
• Language
• ISM Method : Normal
• DPM Select : On
• Fail Over : Off
• Factory Reset
T Tile
• Set ID : 1
Tile Mode
• Tile Mode
Auto Config.
• PIP/PBP
Position
• Fan
Size
• Product/Service Info.
Natural
• Portrait Mode
Reset
• 2X1:
• 2X2:
When using two monitors
When using four monitors
ID 2 ID 2
ID 1 ID 1
Tile ID
• 4X4:
When using 16 monitors
ID 3 ID 3 ID 1 ID 1
ID 2 ID 2
ID 5 ID 5
ID 5 ID 5 ID 6 ID 6
ID 9 ID 9
ID 9 ID 9
ID 8 ID 8
ID 13 ID 13
Move OK
Move Prev.
Tile Mode Off
◀ ▶
ꔋ
Row
2
Colunm
2
Tile ID
1
ID 2 ID 2
ID 1 ID 1
ID 3 ID 3 ID 4 ID 4
ID 3 ID 3 ID 4 ID 4
ID 2 ID 2
ID 6 ID 6
ID 7 ID 7 ID 8 ID 8
ID 11 ID 11 ID 12 ID 12
ID 10 ID 10
ID 14 ID 14 ID 15 ID 15 ID 16 ID 16