Rds Operation - Caliber MCD 261M Manual

6 . T U N E R O P E R AT I O N
13) BAND BUTTON (BAND)
Press BAND to change between FM 1, FM 2, FM 3. MW 1 and MW 2.
10-12) TUNING UP/DOWN BUTTON
Manual Tuning
Press the Up Tuning or Down Tuning button for more than 3 seconds to move the radio
frequency number up or down one step.
Auto Seek Tuning
Press the Up Tuning or Down Tuning button for less than 3 seconds to move to next
station automatically.
14-15-17-18-19-20) PRESET STATIONS BUTTONS
Six numbered preset buttons store and recall stations for each band (3FM/2MW bands).
Store a Station
Select a band (if needed), then select a station. Hold a preset button for 3 seconds.The
preset number will appear in the display.
Recall a Station
Select a band (if needed). Press a preset button to select the corresponding stored station.
4
4) AUTOMATICALLY STORE / PRESET SCAN (AMS)
Automatically Store
Automatically select 6 strong stations and store them in the current band. Select a band
(if needed). Press AMS button for more than three seconds.The new stations replace
stations already stored in that band.
Preset Scan
Scan stations stored in the current band. Select a band (if needed). Press AMS button
for less than 3 seconds.The unit will pause for ten seconds at each preset station. Press
AMS button again to stop scanning when the desired station is reached.
Stereo
The unit will automatically pick up a stereo signal, if stereo signal is available.
7 . C D P L AY E R O P E R AT I O N
21) INSERT AND EJECT CD
Insert a CD label-side up with the unit turned on, and the disc will begin to play. Press
the Eject button to stop CD play and eject the CD.The unit does not have to be turned
on to eject the CD.
20) PAUSE BUTTON (PAU)
Press the pause button to suspend disc play. Press the pause button again to resume disc Play.
10-12) TRACK SELECT
Press the TUNE/SEEK/TRACK/ FORWARD or TUNE/SEEK/TRACK/ REVERSE button
for less than one second to advance
to the next track on the CD,The selected track number will appear on the display. Press
and hold the TUNE/SEEK/TRACK/ FORWARD or TUNE/SEEK/TRACK/ REVERSE but-
ton for more than one second to fast
forward or fast reverse through the disc.
18) REPEAT BUTTON (RPT)
Press REPEAT BUTTON (RPT) during disc play to continuously repeat the track. Press
REPEAT BUTTON (RPT) again to stop Repeating.
17) RANDOM BUTTON (RDM)
Press RANDOM BUTTON (RDM) during disc play to play all tracks on a CD in ran-
dom order. Press RANDOM BUTTON (RDM) again to stop random play.
19) INTRO SCAN BUTTON (INT)
During disc play, press INTRO SCAN BUTTON (INT) to play the first 10 seconds to
each track on the disc. When the desired track is reached, press INTRO SCAN BUT-
TON (INT) again to end the scan and play the selected track.
CD TEXT
The unit can display the first 8 letters of Album Title,Artist Title. If the recorded information
is longer than 8 characters.The rest of text will scroll from right to left on the display.
RDS FUNCTIONS
The unit is equipped with the following RDS function:
- AF Alternative Frequencies
- CT Clock Time
- EON Enchanced other Network
- PI Program identifications
- PS Program service name
- PTY Program Type
- REG Regional Change
- TA Traffic Announcement
- TP Traffic program

8. RDS OPERATION

1. AF FUNCTION
By pressing AF button (7) < 3 seconds to select AF ON/OFF. Under AF "On" mode, if
the tuned in station signal is getting weak, the unit will automatically switches to a dif-
ferent frequency on the same network with stronger signal.