Preparation Before Use - Sharp AN-SS1 Operation Manual

Preparation Before Use

Charging the battery
■
Open the DC IN cover and then connect the charging cable.
Connect the Micro USB charging cable to the slot and to AC adapter
of which DC voltage output ranges 4.75~5.3V(Typical)
Charging Indication:
LED
Battery Status
If the charger is plug in while the power is ON, the unit will automatically
turns off.
The speaker does not operate while charging.
To turn the power on
■
Slide the power switch towards [ON] position.
Red
Charging
EN-6
Purple
≥ 80% Completed
Blue