Sharp AN-SS1 Operation Manual page 13

Listening to Bluetooth enabled devices (continued)
Notes:
z If a device such as microwave oven, wireless LAN card, Bluetooth
device or any other device that uses the same 2.4 GHz frequency
is placed near the system, some sound interruption may be heard.
z The transmission distance of the wireless signal between the device
and the unit is about 10 meters (33 feet), but may vary depending on
your operating environment.
z If a steel concrete or metallic wall is between the device and the unit,
the system may not operate at all, because the wireless signal cannot
penetrate metal.
z If this unit or the source device is turned off before Bluetooth
connection is completed, pairing will not be completed and the pairing
information will not be memorised. Start pairing again.
z To pair with other devices, repeat Manual Connection for each
device. This unit can memorise up to a maximum of 8 devices. If
subsequent device is paired, the oldest device paired will be deleted.
z Once a device is ousted or deleted from the pairing list, the pairing
information for the device is also deleted. Perform Quick or Manual
Connection to listen to the sound from the device again.
EN-12