Technical Data - Zanussi ZRB934PW User Manual

Defrost the freezer when the frost layer reaches a thick-
ness of about 3-5 mm.
To remove the frost, follow the instructions below:
• pull out the plug from the wall socket or switch off
the appliance
• remove any stored food, wrap it in several layers of
newspaper and put it in a cool place
• remove the freezer drawers
• put insulating material around the drawers, e.g. blan-
kets or newspapers.
Defrosting can be accelerated by placing bowls with hot
water (not boiling) inside the freezer.
• Loosen the drainage channel from its resting posi-
tion, push it in according to the illustration and place
it in the bottom freezer drawer where water can collect
• carefully scrape off the ice when it starts to thaw. Use
a wood or a plastic scraper
• when all the ice has melted, clean and wipe the cabi-
net dry, then put the drainage channel back in place.

Technical data

Dimension
Rising Time
The technical information are situated in the rating plate
on the internal left side of the appliance and in the ener-
gy label.
6
• switch on the cabinet and replace the frozen foodstuff.
It is recommended to operate the appliance at the high-
est position of the thermostatic control for some hours
so that it can reach the sufficient storing temperature as
soon as possible.
Important! Never use sharp metal tools to scrape off
frost from the evaporator as you could damage it. Do
not use a mechanical device or any artificial means to
speed up the thawing process other than those
recommended by the manufacturer. A temperature rise
of the frozen food packs, during defrosting, may shorten
their safe storage life.
Height
Width
Depth
1850 mm
595 mm
648 mm
20 h