Table of Contents
Advertisement
2 Installation
To install the product, follow the steps below.
1. Remove the four screws on base metal plate.
2. Pass the USB cable through the base from bottom.
3. Pass the USB cable through the pole from the bottom.
4. Reinstall the metal plate and attach the pole onto the stand base.
5. Pass USB cable through the hinge cover.
6. Plug the micro-plugger of USB cable to the monitor.
7. Attached the hinge cover to the monitor with four screws.
8. Install monitor module to pole.
9. Installation complete.
Brightness Control
Up / Down keys:
When adjustment item is selected, the two keys are defined to decrease or increase the value
of brightness.
2
Advertisement
Table of Contents
Need help?
Do you have a question about the LV5000 and is the answer not in the manual?
Questions and answers