Related Manuals for Logic Controls LV5000
Summary of Contents for Logic Controls LV5000
- Page 1 Model: LV5000 / LV5000T USB Interface 9.7” TFT LED Display With/Without Touch Screen USER MANUAL...
- Page 2 Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures may be required to correct the interference. LOGIC CONTROLS, INC. 404 Sunport Lane, Suite #550 Orlando, FL 32809 TEL: (516) 248-0400 www.logiccontrols.com...
- Page 3 ATTENTION: This document contains confidential information regarding this project, not being allowed the copy of this document as well as the spreading to people not authorized by Logic Controls. 1 Revision History Table Doc. Rev Comments Date Revised by V1.0...
-
Page 4: Table Of Contents
Table of Contents INTRODUCTION ....................1 ....................1 ACKAGE CONTENT ..................... 1 RODUCT VERVIEW ......................1 EATURES INSTALLATION ....................2 DRIVER INSTALLATION GUIDE ............…………3 OS ................. 3 OWNLOAD RIVERS FOR 10 ..............3 NSTALL RIVER UNDER INDOWS TOUCH SCREEN SETTINGS ................6 PRODUCT SPECIFICATIONS ................ -
Page 5: Introduction
Quick Reference Guide Product Overview Logic Controls LV5000/LV5000T is a 9.7" TFT LCD customer display with compact and ecological design. The power consumption is about 2.5W with LED backlight. Two USB-A plugs of the USB cable are used for delivering power and transaction information at the same time. -
Page 6: Installation
2 Installation To install the product, follow the steps below. 1. Remove the four screws on base metal plate. 2. Pass the USB cable through the base from bottom. 3. Pass the USB cable through the pole from the bottom. 4. -
Page 7: Driver Installation Guide
3 Driver Installation Guide Download Drivers for OS This display uses drivers of “DisplayLink” for Windows OS, macOS, Linux (Ubuntu), Android and chromebook OS. Download proper driver files for your OS from the following link, and install the driver following the instructions. http://www.displaylink.com/downloads Install Driver under Windows 10 Once the driver is downloaded, double click the “DisplayLink USB Graphics Software... - Page 8 3. Wait until the installation finished. The utility software will ask you to plug the USB cable of LV5000 into the PC USB socket. 4. The Windows driver will be installed automatically for the device. The following window will be pop-out, which shows the Windows driver has been installed...
- Page 9 5. Click “Finish” button to finish the installation of the driver. The window picture will be displayed on the LV5000 screen. And the following window will pop-out on your main PC screen. Now, you have added LV5000 as another screen with your Windows 10 OS.
-
Page 10: Touch Screen Settings
4 Touch Screen Settings The touch screen feature is optional. The Windows standard HID driver is used for the touch screen feature of LV5000T. There is no extra-driver needed. You can use the touch screen after you install “DisplayLink” Windows driver. But you will see the touch point is on the main screen, rather than on the screen of LV5000T. - Page 11 2. Select “Dislay device on: VGA” 3. Click “Setup” button...
- Page 12 4. Hit “Enter” key until the above picture displayed on the LV5000T screen. 5. Touch the screen of LV5000 once. The setting is finished. Then, you can use “Paint” for drawings as below.
-
Page 13: Product Specifications
5 Product Specifications Specification Description 9.7“ TFT-LED Panel LCD Panel Resolution SVGA (1024 x RGB x 768) Display Active Area 196.61(H) × 147.46(V) Response Time 20 ms typ. Contrast Ratio 400:1 typ. Brightness 250 cd/m typ. 50/60/60/60(Up/Down/Left/Right) Typ. View Angle(CR10) Uniformity 75% Typ.