Bowers & Wilkins DM320 Specification Sheet

DM320
Floor-standing loudspeaker system

Product Summary

If greater efficiency and bass extension are called for then the DM320 with its larger
enclosure and the 3-way system comes into its own.
Equipped with two 8in bass units in a closed box configuration and the acclaimed magnetic
fluid-cooled, light-alloy domed tweeter offers an extended low frequency range with higher
sensitivity.
Technical highlights
The use of a aluminium domed tweeter immediately distinguishes the two models. The specially
created 26mm (1in) tweeter enables high power handling to cope with the heavier usage
imposed on modern hi-fi systems. Frequencies in excess of 20kHz are within its range.
Subtle changes to the cabinet such as the tweeter plate, and bevelled front edges of the cabinet,
help produce a dramatically more even frequency response. The B&W tradition of attention to
detail manifests itself other features, such as the reinforced low-frequency driven diaphragm, the
rigid die-cast chassis, and the provision for bi-wiring or bi-amplification.
Description 3-way 3rd-order, closed box digital
monitor system with bi-wiring/bi-
amplification facility
Drive Units 1 x 26mm high-frequency with metal
dome
2 x 200mm bass/midrange with rigid
die-cast chassis, reinforced
polypropylene and 31mm high
temperature voice coil on Kapton®
former
B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.
Frequency Response 60Hz – 20kHz ± 2dB on reference
axis
Sensitivity
Nominal Impedance 91dB spl(2.83V 1m)
8 ohms
Power Handling 25W – 100W into 8 ohms on
unclipped programme
Dimensions Height: 656mm Width: 262mm
Depth: 280mm
Finish Anthracite, black ash or walnut vinyl
www.bwspeakers.com