Zanussi ZFC 66/14 Instruction Booklet page 8

5. Refit the control panel strip (A) ensuring that the
side runners (G-Fig. 9) slot into the grooves on the
control panel strip.
6. Lay the machine on its back and unscrew the left
levelling foot.
7. Unscrew the right levelling foot (H), hinge (I) and
the stop (L) (Fig. 10) and refit them on the other
side.
8. Refit the foot previously removed (point 6) on the
right side.
9. Remove the handles (Fig. 11).
Refit the handles on the opposite side.
L
H
D537
D162
8
Fig. 10
I
Fig. 11