Advertisement
SnapDisk™ E1000 Expansion Array
Expansion-to-Expansion Connections
Repeat these steps for each SnapDisk E1000 added:
1. Plug a supplied SAS cable into the first E1000 expansion
array's Out port on the Master connector (in bay CL1).
2. Plug the other end into the second E1000 expansion
array's In port on the Master connector.
3. Plug the other SAS cable into the first E1000 expansion
array's Out port on the Secondary connector (in bay CL2).
4. Plug the other end into the second E1000 expansion
array's In port on the Secondary connector.
Attach Power Cords
1. Attach the power cords to the power cord sockets on the
Power Supply modules.
2. Plug the Master power cord from beneath the Master
controller into a UPS appliance (or a properly-grounded
AC power source).
3. On a dual-controller system, plug the Secondary power
cord into a surge-protected source.
Step 5 – Power On the Units
1. Turn on all expansion arrays.
2. Wait until the expansion arrays are up and running.
3. Turn on the SnapSAN S1000.
The unit performs a Self Test which takes a few minutes.
4. At the SnapSAN S1000, verify the expansion units are
recognized by going to Volume Configuration > Physical
Disks in the Web Management Interface.
The new E1000 arrays should be visible on the Show Disks
For drop-down list.
Step 6 – Additional Information
User Guide
For detailed information on setting up and configuring your
E1000, refer to the SnapSAN E1000 User Guide:
http://support.overlandstorage.com/support/snapsan.htm
Warranty and Technical Support
For warranty and technical support information, see our
Contact Us
web page:
http://www.overlandstorage.com/company/contact-us/
index.aspx
To search for more service information, visit our
Knowledge Base
System:
http://support.overlandstorage.com/kb
http://support.overlandstorage.com
You can get additional technical support on the Internet at the
the information found on the
10400520-001 Sep 2013
1st Expansion Array
2nd Expansion Array
Expert
Overland Storage Support web
Contact Us
page on our web site.
©2010-13 Overland Storage, Inc.
Power Cord Socket
Power Switch
page, or by contacting Overland Storage using
Page 4 of 4
Advertisement
