Beko DCU 9330 User Manual page 20

5.8 Auxiliary function
Audio Warning
Cancel Audio warning
audio warning level 1
Your dryer will give an audio warning when
the programme comes to an end. If you do not
want to hear this buzzing or want to change
the volume level, you need to press the
"Volume level" button. No audio warning will
be given when "x" appears on the screen.
C
You can select this function either
before or after the programme
starts.
5.9 Drying degree
Used to adjust the required dryness level.
More drying is performed compared to the de-
fault settings when "+" sign appears and less
drying is performed when "-" sign appears.
Programme duration can change depending
on the selection.
A
This function must be selected
before the programme starts.
5.10 Anti-creasing
A 2-hour anti creasing programme to prevent
laundry from creasing will be activated if you
do not take the laundry out after the pro-
gramme is over. This programme rotates the
laundry in 600-second intervals to prevent
creasing. Press "Anti-creasing" button to ac-
tivate.
Anti-creasing is activated but the programme
is running in the first exemplary figure. Drying
is over and the first step of anti-creasing has
started in the second figure.
20 / EN
Audio warning Audio warning
level 2 level 3
5.11 Changing the contrast
Contrast can be adjusted in order to make the
symbols on the display appear clearer. It may
particularly be necessary to change the con-
trast setting of the display when the dryer is
installed over a washing machine.press and
Press and hold the Spin Speed/Time button
for 3 seconds.
When the contrast is changed at the end of
3 seconds, all symbols on the display will be-
come visible for 3 seconds in order to indicate
that the process is complete.
Perform the same procedure to revert back to
the previous contrast setting.
5.12 Warning indicators
C
Warning indicators may differ
according to the model of your
machine.
Filter cleaning
A warning symbol will appear to remind filter
cleaning after the programme finishes.
C
If the filter cleaning symbol flashes
continuously, please refer to
"Suggested solutions for problems".
Water tank
A warning symbol will turn on at the end of
the programme or when the tank is full with
water. The machine stops operating if the
warning symbol turns on when a programme
is running. To restart the machine, please
drain the water in the water tank. Press
"Start/Pause/Cancel" button to start the pro-
gramme after you have emptied the water
tank. The warning symbol turns off and the
programme resumes operating.
Dryer / User Manual