Specifications - Sony RM-IP10 Operating Instructions Manual

Specifications

Input/output connectors
Control input/output
VISCA RS-232C OUT: Mini DIN 8-
pin type
VISCA RS-422: 9-pin type
TALLY IN/CONTACT OUT: 9-pin
type
LAN: RJ-45 (8-pin), 10BASE-T/
100BASE-TX automatically
detected
Control signal format (for RS-232C/RS-422
communication)
9,600 bps/38,400 bps
Data: 8 bit
Stop bit: 1
Power connector
JEITA type4 (DC IN 12V)
General
Input voltage 12 V DC (10.8 to 13.2 V DC)
Current consumption
0.3 A max. (at 12 V DC), 3.6 W
Operating temperature
0 ºC to 40 ºC (32 ºF to 104 ºF)
Storage temperature
-20 ºC to +60 ºC (-4 ºF to 140 ºF)
Dimensions 391.3 mm × 165 mm × 145.9 mm
1
(15 / inches × 6
2
3
5 / inches) (w/h/d)
4
Mass Approx. 950 g (2 lb 15 oz)
Supplied accessories
AC power adaptor (Sony) (1)
AC power cord (1)
RS-422 connector plug (attached to the unit) (2)
Safety Regulations (1)
Design and specifications are subject to change without
notice.
1
/ inches ×
2
Notes
• Always verify that the unit is operating properly
before use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE
LOSS OF PRESENT OR PROSPECTIVE
PROFITS DUE TO FAILURE OF THIS UNIT,
EITHER DURING THE WARRANTY PERIOD
OR AFTER EXPIRATION OF THE WARRANTY,
OR FOR ANY OTHER REASON
WHATSOEVER.
• SONY WILL NOT BE LIABLE FOR CLAIMS OF
ANY KIND MADE BY USERS OF THIS UNIT
OR MADE BY THIRD PARTIES.
• SONY WILL NOT BE LIABLE FOR THE
TERMINATION OR DISCONTINUATION OF
ANY SERVICES RELATED TO THIS UNIT
THAT MAY RESULT DUE TO
CIRCUMSTANCES OF ANY KIND.
23
GB
Specifications