Advertisement
16" (40cm) Stand Fan with Remote Control
Instruction Manual
AKSF-40BK
WARNING
To reduce the risk for fire, electric shock or personal injury
• Do not use this fan with any solid-state speed control device.
• Unplug the fan before cleaning or servicing.
• To reduce the risk of electric shock and injury to persons, do not use in window.
PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS
This fan is for residential use only. It is not intended for use in commercial or industrial
settings.
Advertisement
Table of Contents
Related Manuals for AirKing AKSF-40BK
Summary of Contents for AirKing AKSF-40BK
- Page 1 16” (40cm) Stand Fan with Remote Control Instruction Manual AKSF-40BK WARNING To reduce the risk for fire, electric shock or personal injury • Do not use this fan with any solid-state speed control device. • Unplug the fan before cleaning or servicing.
- Page 2 Important instructions Read and save these important safety Arrange cord away from traffic area and instructions before using this fan, when where it will not be tripped over. using electrical appliances, basic safety precautions should always be followed Assembly including the following: 1.
- Page 3 1. Make sure that the fan is on a firm, 4. Do not immerse the fan in water and level surface. never allow water to enter the Motor Housing. 2. Making sure the speed control is at OFF position. 5. Do not use gasoline, paint thinner or other chemicals to clean the fan.
- Page 4 12. Inner pole 13. Height adjuster 14. Outer pole 15. Base 16. Base locking mechanism 17. Remote control 18. Fasten clip Technical Specifications Model: AKSF-40BK Power Supply: 220-240V~ 50Hz Rated Power: 50W Class II Conforms to all relevant European Directives.
Need help?
Do you have a question about the AKSF-40BK and is the answer not in the manual?
Questions and answers
Voorgrill los maken van achtergrill
To remove the front grill from the back grill on an AirKing AKSF-40BK fan:
1. Ensure the fan is turned off and unplugged.
2. Locate and remove the fasten clip that secures the front and rear grills.
3. Remove the ring around the grill (you may hear a click when it is released).
4. Carefully separate the front grill from the rear grill.
This answer is automatically generated