Table of Contents
Advertisement
Door Reversal
1. Unplug the appliance from the power supply
before carrying out the below-mentioned
operations.
2. Remove the plastic cover (A) (which clips in)
masking the bottom hinge.
3. Unscrew the bottom hinge (C).
4. Remove the freezer door by releasing it from the
middle hinge (H).
5. Unscrew the middle hinge.
6. Remove the fridge door by releasing it from the
top hinge pin (G).
7. Remove the pin (G) from the top hinge, then
mount these on the opposite side.
8. Refit the fridge door, after having removed the
plugs(I) which must be refitted on the other side.
9. Replace the middle hinge to the left hand side.
10.Replace the freezer door.
11. Screw down the bottom hinge (C) on the opposite
side by using the screws previously removed.
12.The doors can be aligned by adjusting the middle
hinge.
13.The middle hinge can be adjusted horizontally,
with the help of a tool, after having slackened the
two screws.
Important
After completion of the door reversing operation,
check that the door gasket adheres to the cabinet. If
the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that
case, wait for the natural fitting of the gasket or
accelerate this process by heating up the part
involved with a normal hairdrier on a low setting.
B
D589
H
I
I
I
C
A
G
17
Advertisement
Table of Contents
