Routine Clear Path Adjustment - EMS EMS520 Manual

ROUTINE CLEAR PATH ADJUSTMENT

•
clear condition across the monitor path length is needed
before adjustments can be made.
•
Navigate to the setup screen, when asked for password
enter 5566
•
Scroll down to "clear value, span value page" and press
to input clear value percentage.
•
Once desired clear stack value is entered, press
value.
•
Clear stack procedure is now complete
•
press
•
Note: it is common to have to adjust cal zero iris after clear stack
procedure is performed. Refer to zero reflector adjustment
procedure. EMS Vol. 4 section 6
Environmental Monitor Service, Inc. is available to assist you, call our service department at (203) 935-0102 or Email:
techsupport@emsct.com for details and to schedule start up.
to return to main display screen
to store
9