General; Using For The First Time; Changing The Baking Plates - Bestron SWEET DREAMS ASW238 Instruction Manual

OPERATION - General
This device is intended only for domestic use, not for professional use.
1. Housing
2. Baking plates
3. "Heating" pilot light
4. "At temperature" pilot light
Certain parts of the appliance may get hot.
Do not touch these parts to prevent burning yourself.
OPERATION - Using for the first time
1. Remove the packaging.
2. Clean the baking plates to remove any residues that may be left from the manufacturing process (see
"Cleaning and maintenance"). Dry them thoroughly.
3. Put the plug into the wall socket and allow the cakemaker to heat up. This will take about 10 minutes;
allowing it to heat will remove any packaging odour from the appliance.
WARNING:
• The appliance may emit a little smoke and a characteristic smell when you switch it on for the first
time. This is normal, and will soon stop. Make sure the appliance has sufficient ventilation.
• Keep house birds away from the appliance when it is in use. Fumes released from the non-stick coating
when the baking plates are hot may be harmful to birds.
OPERATION - Changing the baking plates
1. Allow the appliance to cool down completely.
2. Open the appliance.
3. Slide the black knobs to remove the baking plates
4. Take a different baking plate.
5. Place the lips of the baking plate into the openings inside the appliance. Carefully push the baking plate
until it clicks into place.
6. Repeat steps 3 to 5 for the second baking plate.
2.
1. 3.
4
5.
6.
8.
7.
5. Non-slip feet
6. Safety lock clip
7. Upper baking plate lock
8. Lower baking plate lock
33
EN