GE AF-650 GP Operating Instructions Manual page 39

EN-07 Domain Name
Range:
Blank [0-19 characters]
EN-08 Host Name
Range:
Blank [0-19 characters]
EN-09 Physical Address
Range:
[00:1B:08:00:00:00
08:FF:FF:FF]
EN-1# Ethernet Link Parameters
Option:
6
[0] Port 1
[1] Port 2
EN-10 Link Status
Option:
[0] No link
[1] Link
EN-11 Link Duration
Option:
Link Duration Port 1 (dd:hh:mm:ss)
EN-12 Auto Negotiation
Option:
[0] Off
[1] On
EN-13 Link Speed
Option:
[0] * None
[1] 10 Mbps
[2] 100 Mbps
EN-14 Link Duplex
Option:
[0] Half duplex
[1] * Full duplex
38
Function:
Domain name of the attached network. Can be automatically assigned when using DHCP.
Function:
Logical (given) name of option.
Function:
– 00:1B: Read only Displays the Physical (MAC) address of the option.
Function:
Applies for whole parameter group.
Function:
Read only. Displays the link status of the Ethernet ports.
Function:
Read only. Displays the duration of the present link on each port in dd:hh:mm:ss.
Function:
Configures Auto Negotiation of Ethernet link parameters, for each port: ON or OFF.
Link Speed and Link Duplex can be configured in par. EN-13 and EN-14.
Function:
Forces the link speed for each port in 10 or 100 Mbps. If par. EN-12 is set to: ON, this parameter is read
only and displays the actual link speed. "None" is displayed if no link is present.
Function:
Forces the duplex for each port to Full or Half duplex. If par. EN-12 is set to: ON, this parameter is read
only.
OPCEIP EtherNet/IP