Quick Start - Decatur Electronics GENESIS-II DIRECTIONAL User And Installation Manual

GENESIS-II DIRECTIONAL

1. Quick Start

1. Press the PWR button on the hand-held remote to
power up the radar unit.
2. Press the ANT FRONT or REAR button to select the
antenna from which you want the radar to transmit.
3. Press and release the MODE button to quickly toggle
between Moving Mode Opposite Direction and Moving
Mode Same Direction. Press and hold the MODE button
for two seconds to activate and then toggle through the
three Stationary Modes.
4. Press and hold the FAST button to select Faster
Mode when you want to track the next strongest target
going faster than the strongest.
5. To lock on a target speed, press the LOCK button.
The target speed will transfer to the LOCKED window.
The radar will continue to process speeds and display
them in the TARGET window.
6. To clear a locked speed, press the LOCK button when an
antenna is transmitting and no target is present.
™
USER'S AND INSTALLATION MANUAL
Rev. 02/05
9