Pretorian Freedom Instructions Manual

Pretorian Freedom Instructions Manual

Device switcher

Advertisement

Quick Links

Freedom Device Switcher
Pack Contents
Carefully check the contents
of the box, which are:
FREEDOM unit.
Charging cable
4 x Device cable
These instructions
FREEDOM is a four-channel device switcher
that allows a single switch to be routed to one
of up to four devices, allowing a disabled user to
select for him/herself which device the switch
is to be used with at any point in time. Selecting
the device can be achieved either by an extended
press of the switch itself, or by momentarily
pressing a secondary select switch where the
user has the motor capabilities to operate two
switches.
Devices may be of any form, provided they
have a conventional switch input via a 3.5mm
jack socket. Typical configurations might
comprise a communications device, a mobile
telephone and a tablet computer. Some devices
(for example the phone and tablet in the above
example) may require additional equipment to
allow connectivity, such as the APPlicator from
INSTRUCTIONS
Product Description
Pretorian. All four outputs are fully isolated
so the unit can work with devices which do not
share the same ground potential.
FREEDOM operates from a rechargeable lithium
battery which is charged via the supplied USB
cable, or may be permanently powered from
a power source such as a wheelchair auxiliary
supply. Once the battery is fully charged the
unit will operate for several weeks between
charges without ever needing to manually turn
off the power. This is vital since the user may not
be able to turn off the power.
Both audible and visible low battery indicators
are provided to prompt the user the recharge
and if the battery should become flat, the unit
'fails safe' by routing the switch to device 1
allowing the switch to be used on the most
important device even with no power.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Freedom and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Pretorian Freedom

  • Page 1 4 x Device cable These instructions Product Description FREEDOM is a four-channel device switcher Pretorian. All four outputs are fully isolated that allows a single switch to be routed to one so the unit can work with devices which do not of up to four devices, allowing a disabled user to share the same ground potential.
  • Page 2 Features • Routes a single switch to up to four devices • Use an extended press of the main switch or a second switch to move between devices. • Selectable dwell time when using extended presses. • Powered from rechargeable battery or external power supply. •...
  • Page 3: Powering The Unit

    Connecting the unit to devices FREEDOM may be connected to up to four devices via the four sockets [5-8] and the supplied cables. Occasionally you may encounter a device which has a switch input which uses a connector other than a 3.5mm socket, in which case one of the supplied cables can be adapted.
  • Page 4: Turning The Unit On And Off

    4 seconds Table 1: Scan Time settings Using FREEDOM with one Switch Pressing the main switch for a period less than the scan time described above will result in the selected device ‘seeing’ a press of the same duration. Pressing the main switch for a period exceeding the selected extended press time will result in the device seeing no press and instead the unit will scan to the next device.
  • Page 5: Locking The Buttons

    Mode button, according to Table 1. Locking the Buttons It is often the case that FREEDOM will be configured by an AT professional, parent or care giver and that no further changes to the settings should be made. To prevent the user inadvertently changing the settings, the Devices and Mode buttons may be locked, preventing further changes.
  • Page 6: Maintenance

    Maintenance FREEDOM has no user serviceable parts. If repair is necessary the unit should be returned to Pretorian Technologies or an authorised Distributor. Replacement Cables If you should misplace the charging cable that is supplied with FREEDOM, replacements may be purchased from most technology retailers.
  • Page 7: Troubleshooting

    Troubleshooting Symptom Possible Cause Remedy No power to unit. • Battery flat. • Charge battery using USB cable or auxiliary power supply. • Cable broken. • Replace USB cable or auxiliary power cable. • Not switched on. • Press Power button [9]. Unit is permanently •...
  • Page 8: Technical Specifications

    Resulting output to device Duration = t Duration = t Figure 1: Effect of main switch press < Scan Time Should the delay lead to difficulties, using FREEDOM in two switch mode is the solution, since this eliminates the delay.
  • Page 12 Unit 37 Corringham Road Industrial Estate Gainsborough Lincolnshire DN21 1QB UK Tel +44 (0) 1427 678990 Fax +44 (0) 1427 678992 SimplyWorks ® is a registered trademark of Pretorian Technologies Ltd www.pretorianuk.com S040137...

Table of Contents