Porsche Connect Driver Manual page 22

Porsche Car Connect app
Configure and activate status (special modes)
A
The functions of the Porsche Vehicle Tracking Sys-
B
tem (PVTS) can be remotely activated/deactivated
C
using the app.
The PVTS vehicle equipment (with or without Driver
D
Card/Remote Keypad) is affected by the insurance
E
and legal requirements in the relevant country.
In certain countries, the maximum duration is re-
F
stricted due to insurance requirements.
G
1. Select Status in the toolbar.
H
2. Select special mode.
I
3. Enter duration.
J
4. Select in the header.
K
Data is saved and displayed.
Select On/Off to activate/deactivate special
L
mode.
M
– Service mode: When this mode is activated, no
N
theft alarm is triggered when the vehicle is being
serviced (e.g. battery is disconnected).
O
– Transport mode: When this mode is activated,
P
no theft alarm is triggered if the vehicle is moved
with the ignition switched off (e.g. on a ferry).
Q
– Disarmed mode: When the mode is activated,
R
monitoring of the Driver Card is deactivated so
that a missing Driver Card no longer triggers an
S
alarm.
T
Activating Fence
U
A notification is created when one of the limits is
V
crossed or reached.
W
1. Select Fence in the toolbar.
X
2. Select Geo Fence/Speed Fence.
Y
3. Select the desired Fence.
Z
20
A tick appears next to the selected Fence.
4. Select in the header.
Data is saved and displayed.
Select On/Off to activate/deactivate Fence.
– Geo Fence: A geographical area is defined. If the
vehicle enters or leaves this area, an alarm mes-
sage is sent.
– Speed Fence: A limit speed is specified. If this
limit speed is exceeded, an alarm message is
sent.
Adding Fence
1. Select Fence in the toolbar.
2. Select Geo Fence/Speed Fence.
3. Select Define new Geo Fence/Define new
Speed Fence.
4. Specify area.
5. Enter name.
6. Select in the header.
The added Fence is displayed.
7. Select Fence.
A tick appears next to the selected Fence.
8. Select in the header.
Data is saved and displayed.
Select On/Off to activate/deactivate Fence.
Editing Fence
1. Select Fence in the toolbar.
2. Select Geo Fence/Speed Fence.
3. Select in the header.
4. Select the Fence to be edited.
5. Change area/value.
6. Select in the header.
7. Enter name.
8. Select in the header.
Data is saved and displayed.
9. Select in the header.
10.Select Fence.
A tick appears next to the selected Fence.
11.Select in the header.
Select On/Off to activate/deactivate Fence.
Emergency calls
There are two different types of emergency call:
– Theft notification: Establish connection to Se-
curity Operating Centre (SOC)
– Breakdown notification: Establish connection to
Porsche Assistance. Depending on the selected
country in which you require help, your vehicle
data may be acquired and transferred (e.g. phone
number, vehicle type, vehicle position)
1. Select Emergency calls in the toolbar.
2. Select Theft/Report breakdown.
3. Push call switch to the right.