Porsche Connect Driver Manual page 20

Porsche Car Connect app
A
– Display current data (pressure difference to
setpoint value) of the Tyre Pressure Monitor-
B
ing (TPM) system
C
Remote control
D
The status of the doors, windows, tailgate, bonnet
E
and sunroof can be displayed. If the vehicle is not
completely locked, the relevant area (e.g. the tail-
F
gate) is marked red on the vehicle. If the vehicle is
locked, a lock symbol will be displayed.
G
Depending on availability, the exterior mirrors can
H
also be folded and the vehicle locked.
I
Lock vehicle
J
b b Porsche Entry & Drive
b b Driver's door fully closed.
K
b b Driver's key is located outside the vehicle during
L
locking.
M
1. Select Remote control in the toolbar.
N
2. Press and hold Lock for at least 1 second.
O
The vehicle doors and the tailgate are locked.
The alarm system is activated and the lock
P
symbol is briefly displayed.
Q
Folding in exterior mirrors
R
S
1. Select Remote control in the toolbar.
T 2. Press and hold Fold in for at least 1 second.
The exterior mirrors fold in.
U
V
Trip (driving data)
W
e Select Trip in the toolbar.
X
Current driving data is displayed.
Display further information by swiping horizon-
Y
tally in the display area.
Z
18
Info
e Select Info in the toolbar.
The following information can be displayed.
– Model designation
– Vehicle colour
– number plate
– Vehicle identification number (VIN)
Stored information regarding the colour and number
plate can be changed in My Porsche. Further infor-
mation is available on www.porsche.com/connect.
Notifications
The app generates notifications to provide informa-
tion about specific events.
Push notifications can be enabled on the mobile
phone to activate these notifications.
e Select Notifications in the main menu (Home).
Display and filter all notifications
e Select All in the toolbar.
By changing the menu items in the toolbar, the
notifications are filtered according to the sub-
scribed service (e.g. PVTS).
Displaying messages
1. Select notification.
2. Select the delete button.
Notifications are deleted centrally, i.e. on all
mobile phones connected to the relevant ve-
hicle. Deleted messages cannot be restored.
Precool/heat function
The availability of the function depends on the ve-
hicle type and configuration. Further information is
available from your Porsche partner.
e Select Precool/heat function in the main menu
(Home).
Precooling/heating the vehicle immediately
Precool/heat can be activated and deactivated
immediately.
1. Select Climate in the toolbar.
2. Select Start precool/heat/Stop precool/heat.
An animation showing the air flow is displayed
or hidden.
Information
– Air flow and air distribution are regulated auto-
matically, irrespective of which settings were
active when the vehicle was parked.
Setting and activating climate timer
1. Select Timer in the toolbar.
2. Select climate timer.
3. Select Once.
– or –
Select Repeat.
4. Set weekday and time.
5. Select in the header.
Data is saved and displayed.
Select On/Off to activate/deactivate the cli-
mate timer.