ICP DAS USA I-8213W-4G Quick Start page 3

4
Quick Test
Step 1: Start → All Programs → Accessories →
Communications → Hyper Terminal → Input new
connection name → Click "OK" → Select USB Interface
"I-8213W-4G AT command Port"→ Click "OK"
Step 2: File → Properties → Settings → Click "ASCII Setup..."
→ Select "Echo typed character locally" → "OK"
Step 3: Input "AT" and press "Enter", then you will receive "AT
OK"
I-8213W-4G Quick Start, E-mail: service@icpdas.com
3