JED T464 Installation And Setup page 9

The following panel illustrates output after selection of option 'a':
[Type a to display or change the default network parameters]
Enter Function - [h(elp) - a|i|j|k|l|v|ESC]: a
Retrieving network interface software version and hardware address.
Please wait...<spinner>
MAC address 00204AA918E0
Updating MAC record: 00204AA918E0
Software version V6.6.0.2 (080926) XPTEXE
Updating the network interface software version record: V6.6.0.2
Retrieving network configuration default parameters....
IP addr - 0.0.0.0/DHCP/BOOTP/AutoIP, no gateway set
DNS Server not set [Default]
DHCP device name : not set <spinner>
[See Special IP Addresses]
Retrieving network configuration parameters running currently.
Please wait....<spinner>
[The following example shows parameters set by a DHCP Server]
IP: 192.168.000.003
Gateway: 192.168.000.254
Mask: 255.255.255.000
Name Server: 203.012.160.035
Manually configure IP, Subnet Mask and Gateway? y/n:
The Network parameters display: T464 configured via DHCP
20090709 v1r0 JED Microprocessors Pty. Ltd. - Page 9 of 27
T464 Installation and Setup
[Should match sticker on T464 case]
[Updates after software update]
[Ethernet module software]
[Default]
[Default]